3D Printing a Phone Mount for Photography

DIFFICULTY LEVEL: Easy

This is a 3d printed Phone Mount that is produced at the fab lab.

Design was downloaded from Thingiverse and printed using PLA Plastic Material on an FDM 3d Printer.

The printed part was then use to document interesting projects at the fab lab using our phones.

SOFTWARE 

Cura

HARDWARE 

None

MACHINES

Ultimaker 3 – FDM 3D Printer

MATERIALS

PLA Filament

PRODUCTION TIME

7 Hours

DOWNLOAD FILES

Production Steps

This section describes the different steps followed to produce a 3D printed phone mount for your phone, to help you take photos and videos.

Step 1 : Download the Design

In order to produce a 3D object using 3D Printing, you need to have its digital design in .STL format.

In this example, the Modular Phone Stand was was designed by HevVye and downloaded for free from Thingiverse.com using this Link

Step 2: Slicing – Preparing The File For 3D Printing

The STL file is then imported  into a slicing software, like Cura. Choose the settings that are needed to have a successful print.

  • Choose Your Material: Typically you may have an idea about what kind of material you will use before you print. There are many different 3D printing materials available, and you can choose them based on the properties that you want your object to have. In this project PLA filaments were used.
  • Choose Your Parameters: The next step is then deciding on the different parameters of your object and the printing process. This includes deciding on the size and placement of your print. The layer thickness chosen was 0.2mm which produces a normal surface finish. The infill chosen was 15% which is enough for the small parts we are producing. No support where required in this print.

The slicing software will then convert the information from the STL file into a G-code, which is a specific code containing exact instructions for the printer.

Step 3: 3D Printing

 

This is when the magic happens! The printer will create the object layer by layer. Depending on the size of your object, your printer, and the materials used, the job can be done in a matter of minutes or over several hours.

Step 4: Remove Your Print And Clean

Remove the printed part from the printer’s printing bed after it cools down.

Depending on what you want your final product to be or the material you used, there may be additional post-processing steps after printing, like painting, brushing off powder, etc.

In this example the extra brim was removed after the print was done.

Step 5: Assemble all parts to build the Phone Mount

Finally, once all components are ready and clean, assemble all parts together to form a brand new phone mount to help you take nice photos and videos using your phone.

SHARE PROJECT